Refrigerated Circulating Water Bath

Product Description

The Refrigerated Circulating Water Bath is suitable for general laboratory cooling, densitometer, refractometer, rotational viscosity tests, spectrophotometers, electrophoresis, condensers, densitometers, polarimeters, isoelectric focusing, calibration and chromatography. Thick MS sheet is used in the production of the outer body of this equipment, which is then powder coated. 304 SS is used in the production of inward chamber. The doubled walled, insulated lid comes with a locking facility. The refrigerated circulating water bath is mounted on a solid edge press. The external side of stainless-steel chamber has brazed cooling coils that ensure uniform cooling. Thick glass wool is used for insulation as well as preventing loss of heat. A sturdy angle iron flame is made for mounting the complete unit.

CFC FREE hermetically sealed compressor is used to attain the temperature below ambient, while immersion type heating element is used to attain the temperature above ambient. The stirrer is fitted to maintain the uniformity of temperature within the chamber. Digital temperature indicator cum controller controls the temperature ranging from 5°C to 90°C with an accuracy of ±0.3°C. This equipment required supply of 220/230 volts AC for working. The FHP pump fitted on the unit circulates the cooled liquid to an external source, like condenser coils.

Chamber Size: 500mm x 250mm x 250mm (W x D x H)

PRoduct details

Automation Grade	Semi-Automatic
Voltage	220/230 Volts AC
Temperature	5 to 90 Degree Celsius
Power	2 HP
Frequency	50 Hz
Power Source	Electric
Phase	Single Phase